Owner's Manual
PART# BRD-2021
®
Erad:::
Innovative
Mountmg
Solut
i
on
s
STEP 3 • When the mount is positioned as far forr-
ward as it will go, tighten the clamp screw untill the Top
and Mid Sections are
sligh
tly
snug
around the mirror
stem. You should still be able to rotate the mount.
STEP 4 • Rotate the mount
so
it is parallel with the
bottom
of
the mirror. Tighten the clamp screw untlll the
mount is securely attached to the mirror stem.
ROTATING
ADJUSTMENT
CLAMP SCREW MUST
-
-
-
BE SLIGHTLY LOOSENED
BEFORE MAKING
ROTATING ADJUSTMENT
BE SURE TO RETIGHTEN
AFTER
ADJUSTMENT
IS
MADE
STEP 5 • Install your radar detector onto the mount. Use the adjustments shown above to adjust the RD
to
your desired position. We
recommend adjusting the RD as close to the bottom
of
your mirror as you can. Be sure to tighten all adjustment screws after the adjust-
ments are made. For the Pivot adjustment, grab the long arm
of
the allen wrench for maximum leverage. You will not strip the threaded
holes in the aircraft grade aluminum.
CAUTION
DO NOT use this mount
if
it interferes with the adjustability
or
the operation
of
your rear view mirror in any way.
DO NOT use this mount
if
the radar detector creates an unsafe viewing obstruction.
DO NOT ATTEMPT TO MODIFY THIS PRODUCT. Consult the manufacturer for assistance.
All BlendMo Jnt products are accompanied with detailed installation instructions and adjustment tips. You are encouraged to contact customerser rice@blend-
mount.com
or
call
J28
Design at
1-888--497-8388
for further assistance.
Check the BlendMount Forum for installation tips and some vehicle specific installs. Your feedback is very important to us. Please email any questions
or
www
.
blendmount
.
com
comments you have to customer ervlce@blendmount.
com
Innovative De ign
And
Precision Manufacturing
PAGE20F2
BlendMount
..
US
PATENT#
0625
,580 S, D656,
811
S, D653,980 S
and other patents pending