Owner's Manual
PART# BRD-2017
Bi
e n
-
-
-
-
-
-
Innovative
Mounting
Solutions
STEP 3 • Position the mount as far forward as you
can. Tighten the clamp screw untill the Top and Mid
Sections are slightly snug around the mirror stem.
You
should still be able to rotate the mount.
(,
i
~~!)·~~::
'
,.
-;--T
_..,
r:-
·/•-
'
:.::
✓':
STEP 4 - Rotate the mount so it is parallel with the
bottom
of
the mirror. Tighten the clamp screw untill the
mount is securely attached to the mirror stem. Do not over
tighten the clamp screw.
ROTATING
ADJUSTMENT
CLAMP SCREW MUST
BE SLIGHTLY LOOSENED
BEFORE MAKING
ROTATING ADJUSTMENT
BE SURE TO RETIGHTEN
AFTER ADJUSTMENT IS MADE
STEP 5 - Install your radar detector onto the mount. Use the adjustments shown above to adjust the RD to your desired position. We
recommend adjusting the RD as close to the bottom
of
your mirror as you can. Be sure to tighten the vertical and pivot adjustment screws
after the adjustments are made. For the Pivot adjustment, grab the long arm
of
the allen wrench for maximum leverage.
You
will not strip
the threaded holes in the aircraft grade aluminum.
CAUTION
DO NOT use this mount
if
it interferes with the adjustability
or
the operation
of
your rear view mirror in any way.
DO
NOT
use this mount
if
the radar detector creates an unsafe viewing obstruction.
DO NOT ATTEMPT TO MODIFY THIS PRODUCT. Consult the manufacturer for assistance.
All Blend Mo Jnt products are accompanied with detailed installation instructions and adjustment tips.
You
are encouraged to contact customerseri1ice@blend-
mount.com
or
call J28 Design at 1-888-497-8388 for further assistance.
Check the BlendMount Forum
for
installation tips and some vehicle specific installs.
www.blendmount.com
Innovative
Design
And
Precision Manufacturing
PAG
E 2 OF 2
Your feedback is very important to us. Please email any questions
or
comments you have to customerservice@blendmount.com
BlendMount - US PATENT#
0625
,580 S, D656,
811
S, D653,980 S
and other patents pending