Owner's Manual
PART# BMG-2006
Bien
ounf-
®
Innovative
Mounting
Solutions
7 • Install the
RD
onto the mount. Make the necessary adjustments as shown
above. Using the upper and lower pivots, and the vertical adjustment, leave enough
room below bottom of mirror to allow access to buttons on top
of
radar detector.
8 •
To
remove the radar from the magnetic mount,
simply tilt the face
of
the RD up and twist slightly to side,
then the magnet will release.
FOR MORE INFO VISIT www.blendmount.com/vldeos
CAUTION
00
NOT use this mount If it Interferes with the adjustability or the operation
of
your rear view mirror in any way.
00
NOT use this mount
if
the radar detector creates an unsafe viewing obstruction.
00
NOT ATTEMPT TO MODIFY THIS PRODUCT. Consult the manufacturer for assistance.
All BlendMount products are accompanied with detailed installation instructions and adjustment tips.
You
are encouraged to contact customerservlce@blendmount.com or call J28
Design at 1-888-497-8388 for further assistance.
Check the BlendMount Forum for installation tips and some vehicle specific installs.
www.blendmount.com
Innovative Design
And
Precision Manufacturing
PAGE
20F2
Your feedback is very important to us. Please email any questions or
comments you have to customerservlce@blendmount.com
BlendMount - US PATENT#
0625
,580 S, 0656,811
S,
0653
,980 S
0690
,245
S,
0690
,246 S,
0690
,247
Sand
other patents pending