Owner's Manual

PART# BMG-2006
Hien
oun.f-®
ESCORT
1 1m1 11 : 1111 11
Innovative Mounting Solutions
ie 2 4 H'
INSTALLATION INSTRUCTIONS FOR ESCORT IX, REDLINE EX, AND 360C RADAR DETECTORS
NOTE: For Illustration purposes, the mount and rear view mirror shown in these instructions may look
slightly different then YOUR mount and rear view mirror .
ROTATING
ADJUSTMENT
PLATE
5 - The two rotating adjustemnt screws can be used
to move the rotating adjustment plate left/right horizon-
tally to point the radar detector in a desired direction.
The two clamp screws are used to secure the mount
onto the mirror as shown next in fig 5.
Innovative Design And
Precision Manufacturing
1 - The magnet must be
removed from the suction
cup mount that the radar
detector came with.
2 - Unscrew and
remove bolt, only the
magnetic piece is used
with the blendmount.
t
WINDSHIELD
PAD
3 - Install aluminum
threaded insert into
magnet, and attach
magnet onto blend-
mount with lip pointed
in direction as shown.
4 - This photo illustrates how the Hook fits into the
recessed area behind the mirror. This is just a
reference photo as you will not be able to see
this during installation.
TIGHTEN CLAMP SCREWS
TO SECURE HOOK
ON MIRROR
6 • Place the Windshield Pad onto the Silicone Pad. Position
the mount as shown above. Compress the Silicone Pad into
the Windshield Pad as you slide upwards into the recessed
area behind the mirror. You will hear the Hook snap into place
when it is positioned correctly. Tighten both clamp screws
to secure hook and mount onto mirror.
PAGE 1 OF 2
BlendMount • US PATENT# D625,580 S, D656, 811 S, D653,980 S
D690,245 S, D690,246 S, D690,247 Sand other patents pending