Installation Guide
Installation
Diagram 4a
PowerZone Connect
with desk/wall Mounting Plate and adhesive feet.
2 positions and 4 positions.
Diagram 4b
PowerZone Connect
wall and under-desk mount.
4.2 Free-standing
If not installed in an equipment rack, PowerZone Connect
ampliers can be placed free-standing on a at surface.
Adhesive rubber feet are supplied for this purpose.
PowerZone Connect ampliers can also be attached
to the underside of desks or wall mounted using
connecting plate hardware. The adhesive rubber
feet should also be used in these circumstances
to minimise the possibility of vibration between
the amplier and mounting surface. Wall and desk
mounting is illustrated in Diagrams 4a and 4b.
It is important in any free standing installation that
airow through the amplier’s side panel mounted
fans and rear panel ventilation apertures is not
compromised by adjacent items. At least 80mm of
free space behind the amplier and 25mm along at
least one side should be retained at all times.
Mounting Plate +
2 x M3 x 6 countersunk
Adhesive Foot
4 positions