Installation Guide
Introduction and Overview
2.2 Connections
PowerZone Connect signal input and output connections are
accomplished via RCA Phono and Euroblock style connectors.
A GPIO (General Purpose In/Out) Euroblock connector enables
some amplier functions to be controlled, and wireless or RJ45
socket Ethernet network connection options are also provided.
PowerZone Connect ampliers have no mains power switch
and are operational as soon as mains power is connected via the
IEC 60320 mains socket.
2.3 Network Features
PowerZone Connect ampliers are TCP/IP network connected
devices that require a wired or wireless network connection
to access their conguration menus. The conguration menus
are accessed via a web page interface and cover Input, Zone,
Output and General Settings functions. The conguration
menus are fully described in Section 4 of this manual.
2.4 Dimensions
PowerZone Connect amplier dimensions and features are
illustrated in Diagrams 1a and 1b. The ampliers are primarily
intended for installation in an equipment rack but can also
be under-desk or wall mounted, or used free standing. They
are fan-cooled and must be installed such that ventilation
apertures are not obstructed.
3. Carton Contents
PowerZone Connect ampliers are shipped in a cardboard
carton containing the amplier unit, a mains cable appropriate
for the sales territory, an accessory pack, and a document pack.
The full contents is listed below.
• Amplier unit
• Mains power cable
• Input connector x 2
• GPIO socket connector
• Output connector x 1 or 2
• Adhesive rubber feet x 4
• Document pack