Installation Guide

Conguration
Output Setup
Open the conguration Dashboard and select the Output
Ta b . The Zone Tab with its Routing menu selected is shown in
Diagram 5d.
• Select the output to be congured. The number of outputs
available will depend on the amplier model, zone setup and
output mode. For example, a two output amplier will have
two outputs available if Lo-Z mode is selected but only one
output available if Hi-Z mode is selected.
• Specifying a Zone as stereo will automatically generate
three output channel options: left channel, right channel or
summed mono. The summed mono signal can potentially be
used to drive a subwoofer.
Diagram 5d
Zone Tab Display
(two inputs only shown)
Diagram 5e
Zone Tab Display
(two inputs only shown)
Select output to be congured.
Output name. Type to edit.
Select a zone source.
Select an output mode.
The Zone Tab with its Output Mode menu selected is shown in
Diagram 5e.
• Select the mode required for the output. The number of
outputs available will depend on the amplier model, input
setup and zone setup. For example, a two output amplier
will have two outputs available if Lo-Z mode is selected but
only one output available if Hi-Z mode is selected.