User Guide

9
EXTENSION CORD
Because of potential safety hazards under certain conditions, it is strongly recommended that you do
not use an extension cord with this appliance. However, if you must use an extension cord it is
absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a
grounding type plug and outlet that the electrical rating of the cord be 115 volts and at least 1.3
amperes.
It is recommended that you install the appliance in a place where the ambient temperature is between
50°F and 109.4°F (10°C-43°C). If the ambient temperature is above or below recommended
temperatures, the performance of the unit may be affected. For example, placing your unit in extremely
cold or hot conditions may cause interior temperatures to fluctuate. The operating temperature range
may not be reached.
CONTROL PANEL
Setting the Temperature Control
The temperature you are setting will increase by one degree each time you press the ^ key, and
will decrease by one degree each time you press the ˅ key.
The range of the temperature control is from 32˚F to 72˚F.
To view the set temperature at any time, press the SET key. The set temperature will flash in
the display window for 6 seconds. After 6 seconds, the temperature inside the unit will
reappear in the display window.
(The temperature preset at the factory is 39˚F.)