Manual

5
2-prong wall outlet is encountered, it is your responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet. The ice maker should
always be plugged into its own individual electrical outlet which has a voltage
rating that matches the rating label on the appliance. This provides the best
performance and also prevents overloading house wiring circuits which could
cause a fire hazard from overheated wires. Never unplug your ice maker by pulling
on the power cord. Always grip the plug firmly and pull straight out from the outlet.
Repair or replace immediately all power cords that have become frayed or
otherwise damaged. Do not use a cord that shows cracks or abrasion damage
along its length or at either end. When moving the ice maker, be careful not to
damage the power cord.
Extension Cord
Because of potential safety hazards under certain conditions, it is required that you
do not use an extension cord with this ice maker.
TECHNICAL INFORMATION
Model: BLZ-ICEMKR-50GR
Electrical power: 115VAC ~ 60Hz
Power consumption: 12.2 kWh/100 lbs of ice
Ice-making /-harvest rated current: 3.0A/3.6A
Refrigerant: R134a, 3.88 oz
High/Low side pressure: 350 psig/130 psig
Width x depth x height: 14⅝’’ x 23⅝” x 33”
Unit weight: 84 lbs
Maximum ice storage: 25 lbs
Ice-making capacity: 50 lbs/day*
Ice shape: Cube
Ice cube dimensions: 3/4″ x 3/4″ x 1″
The technical data and performance index listed above should be used for reference only.
They are subject to change.
*The actual quantity of ice produced per day can vary with environment and water
conditions