Manual

22
6. Prepare a sanitizing solution made of 1 ounce of household bleach and 2
gallons of hot water (95ºF to 115ºF). Wipe the entire bin inside and outside,
covering the entire surface of the walls.
7. Fill a spray bottle with the sanitizing solution and spray all corners and edges,
making sure to cover all surfaces with the solution.
8. Allow the solution to be in contact for at least 3 minutes, then dry.
9. Repeat step 5 to rinse the ice making system one more time.
10. Press the ON/OFF button again. The machine will return to the regular ice
making mode. Discard the first batch of ice.
Control panel:
+
_
Description of LEDs and buttons:
1. Bin Full (Red) LED: Bin full indicator light
When this is lit, the ice storage bin is full of ice or there is something blocking
the bin-full probe. The unit will stop working. When ice cubes are removed from
the ice storage bin, freeing the bin-full probe, the red LED will remain flashing
for 3 minutes, then the unit will restart and return to the ice making mode.
2. Ice (Green) LED: Ice making indicator light
When this is lit, the unit is working in the ice making mode controlled by a
The ice machine cleaner contains acids.
DO NOT use or mix with any other solvent-based cleaner
products.
Use rubber gloves to protect hands. Carefully read the material
safety instructions on the container of the ice machine cleaner.
Discard the first 3 batches of ice produced after cleaning.