Owner`s manual
THE CALDERA
Page 4
INTRODUCTION
Thank you for purchasing the Caldera Zero Clearance Fireplace Gas Heater.
The Caldera is one of the most advanced direct vented zero clearance gas heaters on
the market. It is designed using the latest technology and manufactured to the highest
quality.
Some of the many features are:
Electronic Valve Intermittent pilot & remote capability.
Heater Classification It is classified as a heating appliance. Therefore, it can be
operated continuously for zone heating.
High Efficiency It has high efficiency; therefore, it is less expensive to operate.
Adjustable Flame The flame aesthetics and heat output can be adjusted to suit the
owner’s moods and heating needs.
Solid Construction It is constructed mainly heavy gauge steel for long life and
durability.
Please read the manual carefully prior to installation and operation of the
appliance. Proper installation, operation and maintenance of the appliance will
provide you with many years of enjoyment.
CAUTION
Due to high temperatures, the appliance should be located out of traffic and
away from furniture and draperies.
Children and adults should be alerted to the hazards of high surface
temperature and stay away to avoid burns or clothing ignition.
Young children should be carefully supervised when they are in the same room
as the appliance.
Clothing or other flammable material should not be placed on or near the
appliance.
Any parts removed or opened for servicing of the appliance must be properly
replaced prior to operating the appliance.
The appliance must be inspected before use and at least annually by a qualified
service person. More frequent cleaning maybe required due to excessive lint
from carpeting, bedding material, etc. It is imperative that the control
compartments, burners and circulating air passageways for the appliance be
kept clean.
Venting terminals shall not be recessed into a wall or siding.
This gas appliance must not be connected to a chimney flue serving a separate
solid fuel burning appliance.