Owner`s manual

THE CALDERA
Page 14
Step 2: Place left and right twigs on log pins
as shown.
ASSEMBLY INSTRUCTIONS Cont...
PLACEMENT OF LOGS AND TWIGS
WARNING : Do not place the logs in any other configuration than the one shown. Fire,
explosion or excessive carbon monoxide (CO) may result, causing property
damage, personal injury or loss of life.
Step 1: Place rear log in notch on left
side and on log pin on right side.
Step 3: Place left log on left front
burner and rear log as shown.
Step 4: Place center twig on rear log
and front of burner as shown.
Step 5: Place right log on rear log
and front of burner as shown.