Operation Manual

128
Amplifier
The car sound system provides connec-
tions that allow you to connect external
amplifiers.
We recommend you use well-matched
products from the Blaupunkt or Veloci-
ty product ranges.
Switching the internal amplifier
on/off
If you are using external amplifiers, you
can switch off the device’s internal am-
plifier (“INT AMP OFF” setting).
Note:
● Please check this setting if the
loudspeakers do not emit any
sound.
➮ Press the MENU button 9.
➮ Press the button 7 repeatedly
until “VARIOUS MENU” appears in
the display.
➮ Press the OK button : to display
the menu.
➮ Press the or button 7 repeat-
edly until “INT AMP ON” or “INT
AMP OFF” appears in the display.
➮ Use the buttons 7 to choose
between “INT AMP ON” and “INT
AMP OFF”.
When you have finished making your
changes,
➮ press the MENU button 9.
TMC for dynamic navigation
systems
TMC stands for “Traffic Message Chan-
nel”. Traffic reports are broadcast digit-
ally via TMC, which means they can be
used by compatible navigation systems
during route planning. Your car sound
system has a TMC output, which you
can use for connecting Blaupunkt nav-
igation systems. You can find out from
your Blaupunkt dealer which navigation
systems can be used with your car
sound system.
If a navigation system is connected and
a TMC station is being received, TMC
lights up in the display.
If dynamic navigation is active, the sys-
tem will tune into a TMC station auto-
matically.
TMCAMPLIFIER