Operation Manual

111
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Making a timer-controlled
recording of a DAB programme
You can use this device to record a DAB
programme at a preset time. The DAB
programme that you listened to last will
be recorded (if can still be received) for
a set length of time (adjustable between
1 and 90 minutes) whilst the car radio
is switched off. You can programme two
timers.
Switching timer-controlled
recording on/off
➮ In MMC mode, press and hold
down the REC•DEL button ? for
longer than two seconds.
The MMC record menu is displayed.
“MMC REC ON” or “MMC REC OFF”
appears in the display.
➮ Press the or button 7 to
switch between the settings “MMC
REC ON” and “MMC REC OFF”.
Setting the timer and recording
duration
You can programme two recording tim-
ers.
Note:
● If you only want to make one re-
cording at a particular time, set the
second timer to the same time set-
ting as the first.
➮ In MMC mode, press and hold
down the REC•DEL button ? for
longer than two seconds.
The MMC record menu is displayed.
“MMC REC ON” or “MMC REC OFF”
appears in the display.
➮ Press the button 7.
The currently set recording “DURA-
TION” is displayed. The set recording
duration is the same for both timers.
To set the recording duration,
➮ Adjust the recording duration using
the
buttons 7.
➮ Press the button 7.
TIMER 1 and the set clock time are dis-
played.
To adjust TIMER 1,
➮ press the OK button :.
The hours behind “TIMER 1” begin to
flash.
➮ Use the / buttons 7 to set the
hour at which you want recording
to begin.
To set the minutes for the start of re-
cording,
➮ press the button 7.
The minutes behind “TIMER 1” begin
to flash.
➮ Use the / buttons 7 to set the
minute at which you want recording
to begin.
➮ Press the OK button :.
Note:
● If you want to set the second timer,
press the
button 7 whilst “TIM-
ER 1” is being displayed. “TIMER
2” is displayed. Adjust the settings
for “TIMER 2” in the same way as
described for “TIMER 1”.
MMC/SD MODE