Operation Manual

76
Adjusting the volume
You can adjust the volume in steps from
0 (off) to 50 (maximum).
To increase the volume,
➮ turn the volume control 5 clock-
wise.
To decrease the volume,
➮ turn the volume control 5 anti-
clockwise.
Setting the power-on volume
You can set the default volume level at
which the device plays when it is
switched on.
➮ Press the MENU button 9.
➮ Press the or button 7 repeat-
edly until “VOLUME MENU” ap-
pears in the display.
➮ Press the OK button : to display
the volume menu.
“ON VOLUME” and the currently set
value are displayed or “LAST VOLUME”
is displayed.
➮ Adjust the power-on volume using
the buttons 7.
To help you adjust the setting more eas-
ily, the device will increase or decrease
the volume as you make your changes.
If you change the setting to “LAST VOL-
UME”, the volume when the device
switches on will be the same as the vol-
ume level that was set the last time you
switched the device off.
SWITCHING ON/OFF
ADJUSTING THE VOLUME
Switching on/off
There are various ways of switching the
device on/off:
Switching on/off using the vehicle
ignition
The device will switch on/off simultane-
ously with the ignition if the device is
correctly connected to the vehicle’s ig-
nition and you did not switch the device
off by pressing button 1.
Switching the device on/off using
the detachable control panel
➮ Detach the control panel.
The device switches off automatically
after approx. one minute.
➮ Attach the control panel again.
The device switches on. The last set-
ting (radio, CD/MP3, MMC, CD chang-
er or AUX) will be reactivated.
Switching on/off using button 1
➮ To switch on the device, press but-
ton 1.
➮ To switch off the device, press and
hold down button 1 for longer
than two seconds.
The device switches off.
Note:
● To protect the vehicle battery, the
device will switch off automatically
after one hour if the ignition is off.