Operation Manual

88
Installation
System test after installation
The system test allows you to test the external connections to
see that they are working correctly.
Proceed as follows:
1. Turn off TravelPilot EX-V
2. Press the
button and keep it pressed.
3. Turn on the TravelPilot EX-V and release the
button when
the service menu appears.
4. Using the
button, select the test menu and press the
OK
button.
5. Now select the required test using the
or button, press
the
OK
button and follow the on-screen instructions.
If the test was completed successfully, the menu item will be
labelled with a tick. If an error occurs, an appropriate notice
will be displayed.
6. Close the service menu by pressing the
button.
Calibration
After installation, the TravelPilot EX-V must be calibrated. You
will find the procedure for this described in the operating instruc-
tions.
EA_TP_EX-V_gb_Teil4 28.10.2005, 12:24 Uhr88