Operation Manual

68
If connected properly, the reversing camera picture will appear automatically as soon
as you put the car into reverse gear.
Plus Point: If you use the 16:9 wide screen monitor together with the revers-
ing camera, the picture will be displayed horizontally inversed. This gives the
same visual impression as when using the rear-view mirror.
Other settings
1. Mark on the top line of the “Settings” menu. Press
OK
.
The sub-menu for other settings will appear. ✔
Setting the clock
You can configure the summer time, the clock time, the time display during naviga-
tion, the time format and the clock display on the monitor.
The minutes are normally set automatically via GPS. You have to set the hours
manually.
1. Select the “Clock” menu item. Press the
OK
button.
The “Clock” menu is displayed. ✔
2. Select the “Time” menu item. Press the
OK
button.
The menu for adjusting the time is displayed and the hours are marked. ✔
3. Set the required local time (hours) using the
buttons.
Press the
OK
button.
The local time that you set appears alongside the menu item. ✔
Note
If need be, you can also set the minutes in the same way. However, please
note that you can only set the minutes in 30-minute steps if a time adjust-
ment has already taken place via GPS.
System settings
BA_TP_EX-V_gb_Teil3 28.10.2005, 12:22 Uhr68