Operation Manual

67
Switching to the video source
You can switch to the external video signal on the 16:9 wide screen monitor. The
external video signal can only be watched whilst the vehicle is stationary or is not
moving any faster than 4 mph.
1. Press the SRC button 4 on the monitor to switch between navigation mode
and the external video source.
Selecting the display format
You have the option of changing the display format for playing the external video
source.
1. Keep pressing the MODE button 6 until the required format is set.
Selection takes place in the following order:
Normal ➨ Cinema ➨ Full ➨ Normal ➨ …
Notes
The system does not allow you to switch modes in navigation mode. The
navigation display is always shown in full mode.
The selected format can be configured and saved separately for the re-
versing camera and the external video source.
Activating the reversing camera
A special adapter is required to connect a reversing camera. Please contact your
authorized Blaupunkt dealer or ring the Blaupunkt telephone hotline to find out which
adapters are available.
1. If you use a reversing camera and want the picture provided by this camera
shown on the TravelPilot EX-V display, select “Reversing camera”.
Press
OK
.
The reversing camera input is active if it is marked by a checkmark. ✔
System settings
64
BA_TP_EX-V_gb_Teil3 28.10.2005, 12:22 Uhr67