Operation Manual

45
Switching TMC on/off
The TMC function is switched on or off in the Route options menu. For more informa-
tion, refer to the section on “Selecting route options”.
Selecting the TMC station with the TMC D-Namic tuner box
The “TMC D-Namic tuner box” automatically searches the frequency band in the back-
ground for TMC stations within reception range. The TMC stations within reception
range appear in a list which is updated continually.
You can select a TMC station from this list.
1. Press
!
on the remote control unit.
The “Congestion” menu will appear. ✔
2. Select “TMC station list”. Press
OK
.
The TMC station list will appear. ✔
Note
If there are no TMC stations available, you will hear a beep.
3. Select the TMC station. Press
OK
.
The “Congestion” menu will appear. The TMC station currently selected will
be displayed next to the menu item. ✔
Plus Point: The “TMC D-Namic tuner box” will automatically tune into the
TMC station you have selected (preferred station). This means that after you
leave the reception area served by your preferred station (the system will
tune into a different TMC station) and return to this reception area again lat-
er, this is the station that will be selected even if other TMC stations are
available. This intelligent switching function means that the station indication
may change frequently in the reception area as well. This ensures that you
always receive all of the traffic information which is transmitted by the TMC
stations within reception range.
Dynamic route guidance with TMC
BA_TP_EX-V_gb_Teil3 28.10.2005, 12:22 Uhr45