Technical data

- 6 -
Technical data
Basic navigation unit 8 618 841 990
with integrated gyro, GPS receiver and CD-ROM player
- Rated voltage (Urat) 14 V DC
- Rated current (I) Typically 0.55 A (Imax 1.05 A)
- Stand-by current Typically 0.35 A
- Speech output/volume Max. 3 Watt/4 Ohm
- Time to first position computation (Warm start, memory refresh) < 2 minute; (cold start, memory clear) < 15 minutes
- CD-ROM drive For 12 cm CD to DIN EN 60908 only
- Operating temperature -15°C to +60°C
- Mounting orientation Horizontal/+5°
- Width 184 cm
- Height 73 cm
- Depth 171 cm
- Weight 1.9 kg
5" colour display 8 638 710 538
- Contrast control Manual on rocker
- Brightness control Automatic by phototransistor, manual on rocker
- Mounting Universal ball-and-socket joint
- Width 148 mm (without cable and base)
- Height 105 mm (without cable and base)
- Depth 51 mm (without cable and base)
- Cable length 5.5 m
- Illumination terminal Pulse-width-modulated signal on terminal 58d (clock frequency 60 Hz - 180 Hz)
RGS 06 Service Menu
Insert navigation CD
into the basic unit
Reset standby time to
0 min. in the
DSC menu
TURN OFF the ignition
Press the DOWN key
for > 5 sec. while you
turn on the iginition
Switch the engine on in
addition for dynamic test
of the sensor system
Service Menu
- Change language
- System install.
- System- diagnosis
- Navigation
System diagnosis
- Calibration values
- Error memory
- Hardware test
- Sensor test
- Strech calibr.
- GPS status
- Keyboard test
- LCD test
- Software vers.
- RETURN
Enter test stretch in m.
(min. 100 m)
and drive stretch
Display values:
Gyro, wheel sensor,
speedometer, km/h, direction
Display instantaneous
GPS data
Test key
functions
Leaving the system
installation level
(reactivate standby time!)
System install.
- Strech calibr.
- Sensor- test
- GPS status
- Keyboard test
- RETURN
Select national language
Default = German
Leaving the service menu
(reactivate
standby time!)
Leaving the system
diagnosis level
(reactivate standby time!)
Subject to modification!
ENT