Radio / CD Toronto RDM 126 Operating instructions Toronto RDM126 d® 1 03.06.
ENGLISH 17 FRANÇAIS 18 16 15 NEDERLANDS ITALIANO 20 19 14 1 SVENSKA 13 3 4 5 6 7 8 9 10 11 12 PORTUGUÊS ESPAÑOL 2 3 Toronto RDM126 d® 3 03.06.
Contents Quick reference ............................ 31 Important notes ............................ 37 Precautions ........................................... 37 Traffic safety ......................................... 37 Installation ............................................. 37 Telephone mute .................................... 37 Accessories .......................................... 37 KeyCard theft protection system ........................................... 38 Putting the unit into operation .
Switching on/off via the ignition: When connected correspondingly, the set can also be turned on and off via the vehicle ignition. After the ignition has been switched off, a double beep tone will remind you that you should remove the KeyCard before leaving your vehicle. 3 For instantly muting the volume. button the volume By pressing the will be muted immediately. “MUTE” will appear in the display. The function is cancelled by pressing or VOL+.
6 Rocker switch Radio operation CD operation / Station search Up Down <> Up/Down in short intervals when AF is off <> To scroll through the station networks when AF is on, e.g. NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE ... . / Changer operation (optional) Title selection Up Down Press once to go back to the beginning of the current title. CD selection Fast advance, audible (CUE). Hold down as long as required. Title selection Up Down Upwards: Press briefly.
n o 8 KeyCard theft protection system To operate the set it is necessary that the KeyCard is inserted.
CD-Scan Press SC/MIX for approximately two seconds until you hear a beep. “CD-SCAN” appears in the display. The unit will scan all CD titles. To stop CD-Scan: Press SC/MIX once again. Changer (CDC) operation (optional) MIX CD The CD titles will be played at random. The individual discs are selected in numeric order. MIX MAG The CD titles will be played at random. The individual discs are also selected in random order. MIX OFF The Mix function is deactivated.
• SRC SRC (source) When having a CD inserted you can switch between the different audio sources radio, CD, and CDC/AUX (if activated). (Eject) Hold down the button for approximately two seconds (beep) and the CD will eject. DEUTSCH ENGLISH FRANÇAIS ITALIANO Extra function preset buttons To store and recall a PTY programme type. On FM, you can store and recall one programme type on/from each preset button when PTY is active (“PTY” lights up in the display).
C GEO To adjust the balance (left/right) and fader (front/rear) with the rocker switch. D AUD To adjust the treble and bass frequencies with the rocker switch. The Loudness function is active if “LD” appears in the display. For more information see chapter “DSC programming”. Treble + Treble – Bass – Bass + Fader front Fader rear Balance left Balance right The last setting will be stored automatically. To switch off GEO: Press button once again.
Precautions Installation Accessories Before starting to use your new car radio, please read the following information carefully. If you would like to install your new car stereo yourself or add other audio components to existing ones, then please read carefully the enclosed instructions on installation and connection. In order to ensure that the set operates properly it is necessary that the positive power supply line is connected via the ignition and the permanent +12 V lead.
KeyCard theft protection system This car radio is supplied with one KeyCard as standard, though it can also be operated with a second card. If you have lost your KeyCard or if it was damaged, you can buy a new one from your specialised dealer. When using two KeyCards, the settings stored on the first card will be adopted. However, you can individually store the following functions: Preset button assignments, bass, treble, balance and fader settings, Loudness, TA (traffic announcement volume), beep volume.
When the vehicle is stationary and the KeyCard removed, the KeyCard tongue can be switched to flash for extra anti-theft security. For this it is necessary that the positive power supply line and the permanent +12 V lead are connected such as described in the installation instructions. Be sure that “LED ON” is adjusted in the DSC mode. If required, please refer to chapter “DSC programming - LED”. CD, or CDC (AUX) AUX is only available if no Blaupunkt changer CDC A05 or CDC F05 is connected.
Radio operation with RDS (Radio Data System) The Radio Data System offers you more convenience when listening to FM radio stations. More and more radio stations have begun to broadcast RDS information alongside their programmes. As soon as a programme has been identified, the station name including a regional identifier, if applicable, will appear in the display, for example, NDR1 NDS (regional programme in Lower Saxony, Germany). When RDS is activated, the preset buttons become programme buttons.
You can shift between the memory banks I, II and T in order to store stations and recall them later. The currently selected memory bank is indicated in the display. Condition: AF and PTY must be switched off (i.e. the symbols do not light up in the display). Press << >>; the frequency will change in short intervals in downwards or upwards direction. When holding the right or left part of the rocker switch depressed, the frequency scan is speeded up.
Automatically storing the strongest stations with Travelstore You can automatically store the six most powerful FM stations of your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. • Press the FMT button for two seconds. “T-STORE” will appear in the display. The six strongest FM stations will be automatically stored on the memory bank “T” (Travelstore). When this process has been completed, the radio will play the first station.
Switching PTY on/off • Press PTY. When the function is active, the programme type selected last will briefly appear in the display. “PTY” will be permanently indicated in the lower right corner of the display panel. NEWS CURRENT AFFAIRS INFORMATION SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP MUSIC ROCK MUSIC M.O.R. M (middle of the road music) LIGHT M (light classical) CLASSICS (serious classical) OTHER M (other music) • Press << or >>. The programme type selected last will be displayed briefly.
If the system is unable to find a station offering the selected programme type, the display will show “NO PTY” and a beep tone will be released. The station received before starting seek tuning will be tuned in. You can assign different programme types to each preset position. Please refer to the next chapter “Storing programme types”. b) Using the << >> buttons of the rocker switch When PTY is switched on, you can select a programme type using buttons << >>.
Warning beep If you leave the reception area of the traffic programme station currently tuned into, you will hear a warning beep after approximately 30 seconds. This alarm tone will also be released when pressing a preset button which has no traffic programme allocated to it. ENGLISH FRANÇAIS ITALIANO NEDERLANDS If the priority for traffic announcement programmes is activated, “TA” will light up in the display. To switch the priority on or off: • Press the TA button.
Switching the warning beep off a) Tune into another station offering traffic information: • Press the rocker switch or • press a preset button which has a traffic programme station allocated to it. Alternatively: b) Switch off the priority for traffic announcements: • Press TA. “TA” will disappear from the display.
Make sure that a disc is inserted, “CD IN” shows on the display panel. Press SRC to go through the available audio sources: • Press as many times until the display briefly shows “CD”. Inserting a CD • / Title selection Up Down Press once to go back to the beginning of the current title. Fast advance, audible (CUE). Hold down as long as required. Switch on the radio. Insert a CD with the label facing up without the use of force. The CD will be transported to its playing position automatically.
MIX playback Selecting CDs and titles MIX playback When the MIX function has been activated, the CD tracks will be played in random order. “MIX” will then appear in the display. You can have the CD tracks played in random order. MIX CD In order to switch the MIX function on or off, • press SC/MIX briefly. CDC operation (optional) CD selection Up Switching to CDC operation Make sure that at least one CD has been inserted into the magazine.
DEUTSCH Selecting the display mode You can store your preferred display mode which will then be active each time the radio is switched on. If required, • press AF as many times until the desired setting is displayed. Use this feature to programme and play your favourite CD titles. Up to 30 CDs can be managed in the CD mode, up to 99 discs in the CDC mode. • Make sure that the TPM function is switched off (“TPM” not shown on the display panel).
CD playback with TPM b) Clearing a CD from the TPM: • The TPM function must be switched on (TPM on/off with the TPM button). The tracks stored with TPM will be played in ascending order. Any tracks which were not stored will be skipped over. Clearing TPM information Using the CLR (clear) button, you can clear single tracks, all of the tracks for one CD or the entire Track Programme Memory. For CDC operation, you can also clear the TPM information of either the inserted magazine or all magazines.
• Press . The first underscore character will flash. • Select the first character with the help of the rocker switch / . You have the choice between the capital letters A to Z, special characters and the numbers 0 to 9. • Use the rocker switch << >> to move to the next underscore and select a character. You can select up to eight characters for CD and up to seven characters for CDC operation. Use the DSC feature to delete a CD name. • Press DSC.
DSC programming • After having updated the last CD or magazine, press TPM for approximately two seconds (beep). To quit the function, • press DSC. The system has saved the TPM information for all of the CDs which were inserted. For all other discs, the TPM information and CD names have been deleted. DSC (Direct Software Control) allows you to customise certain programmable, basic settings to suit your personal needs and preferences and then store them.
SPEECH 0: Music/speech off SPEECH 1: Linear reproduction (bass, treble and Loudness set to “0”) SPEECH 2-4: Different settings for volume, bass and treble with the Loudness being switched off. Try out which SPEECH setting you like most. BEEP Acknowledgement tone for all functions which require a button to be pressed for more than one second. The volume can be adjusted from between 0 to 9. (0 = off). To “train” a second KeyCard.
accept any operations except from being switched off. Re-insert the card. PTY LANG SCANTIME To select the programme type language: DEUTSCH or ENGLISH Use this function to set the scan time for the radio or CD player from between five and 30 seconds. S-DX To adjust the seek tuning sensitivity for distant reception. DX 1 - high sensitivity DX 3 - low sensitivity S-LO To adjust the seek tuning sensitivity for local reception.
DEUTSCH Appendix Specifications 0.9 µV at 26 dB signalto-noise ratio FM frequency response: 30 - 16 000 Hz Then call the following chargeable phone number: 01 80 / 5 25 56 66. - Using the area code to be entered you will be automatically given the address and phone number of the next Blaupunkt service centre. You can also request this information by fax.
Blaupunkt-Werke GmbH Bosch Gruppe 3/96 Pf K7/VKD 8 622 400 573 30 Toronto RDM126 d® 30 03.06.
