Operation Manual

RX 19-1

USB Operation

General Operation

PLAY/PAUSE

BACK

STOP

+10

(jump 10 tracks)

Remark:

Plug-in the USB stick directly or use an USB-extension cable which is not longer than

25 cm.

Playback

1. Plug or slot in USB device into the port.

2. Set the “FUNCTION” selector to “USB/SD/MMC” mode.

3. Playback will start automatically from the first track.

4. Press the “STOP” button when play finished.

5. Press “PLAY / PAUSE” button again, playback will start from the first track.

6. During Playback, press USB/SD/MMC button on the top panel for interchange

of USB/SD playing.

Remark:

1. USB 2.0 maximum capacity: 32 GB

2. After playback completed, without any signal given for 15 minutes, the unit will

switch to standby mode automatically.

Insert USB into USB interface.

Unit start playing from first track.

Press Pause to stop playing temporarily.

Press again to resume playback.

Press to go to the next track.

Press to go to the previous track.

Press to stop all playback.

Press once to jump 10 tracks

Press again to jump 10 more tracks