Owner`s manual

PP20 / PP25
5. FM operation via remote control
Press FM SCAN button shortly to start auto scan and station preset function
automatically, repress it shortly to stop auto scan and play first preset station;
press button shortly to decrease FM frequency by 0.1MHz each step, press
button longer time to auto scan backward and stop till get the available station;
press button shortly to increase FM frequency by 0.1MHz each step, press
button longer time to start auto scan forward, and stop till get the available station;
press the key SAVE to save the auto scanned stations, the scanned station will be
saved as P01, the 2nd P02,…… till the last P40. Max 40 stations to be saved. Each new
saved station will cover the previous saved stations.
Inputting 1 or 2 digits from the remote control’s digits button part can get and play
the preset stations. For example, there have 20 preset station ready in unit, if press 1
and 5 number from remote control, 0015 will display, then the unit will switch to
“P15” preset station and play. If you also input 3 digits or 4 digits from remote
control, the unit will play and get the correspondence FM frequency stations
between 87.5-108MHz. For example, if you input 1043 from remote control, then
1043 will show on display and play FM station frequency at 104.3MHz.
Press to increase the volume, press to decrease the volume.
BLUETOOTH OPERATION
1. Power on the unit, short press the button for sound output; then short press
mode button switch to “Bluetooth” mode, the “BLUE” will show on LCD screen and
come along with one notice sound, then the unit is ready to pair with other
Bluetooth device.
2. Activate the Bluetooth function on your device in order to start Bluetooth
scanning and pairing. Check the available Bluetooth device list and select
“BLAUPUNKT PP20”, input “ 0000” in case of POP screen request. When there have a
short sound notice sound come out from speaker, that is mean the unit has paired
with your Bluetooth device already. If you switch off the Bluetooth function on your
Bluetooth device, there will have two short notice sounds come out from speaker
which means the Bluetooth is disconnect with speaker.
3. Select the music and play on your Bluetooth device, then the speaker will wireless
play the music via Bluetooth. In Bluetooth mode, you can get play/pause, press/next
operation by / / key from remote control or front panel.
Important: The Bluetooth operation for PP25 is same, just the pairing name is “
BLAUPUNKT PP25”.
13