Owner`s manual

PP20 / PP25
Radio wake up: at FM radio mode, press “0” and hold 2 seconds on the remote
control, “ON” will show on display, then the current FM station will be set up as the
alarm source; repress “0” and hold 2 seconds on the remote control, then “OFF” will
display, then the FM station alarm source will be cancelled, and switch “ buzz” alarm
source.
Snooze : When the alarm is activated, the alarming icon will flare and buzz up 1
minute if there is no further operation; then the unit will enter to snooze mode
automatically, and ring up again after 5 minutes; the snooze time will repeat 2 times.
The alarm icon will stop flare after that. You can press any more key except to
cancel the alarm and snooze. Please kindly note when the alarm is activated, the
playback output will stop and resume till alarm completed.
Important: for our model PP25, you can turn the volume knob instead of time
adjustment knob to achieve the setting operation. The other is same as PP20.
FM RADIO
Before to do the FM reception, please extent the telescope FM antenna as long as it
can be. Please place the unit next to window for better reception. If the FM reception
is not good, please try to move other place for reception.
1. If there did not plug on USB, SD or TF card into product, press button shortly to
enter FM radio mode, or press mode button switch to FM mode. In FM mode, you can
press clock key to switch display interface between FM radio and clock.
2. Press button longer time will start to auto scan and save the station
automatically. Repress button shortly, auto-scan will stop. The first scanned
station will be displayed and saved as P01, the unit can save and preset 40 stations
maximum.
Important: For PP25, you can press down the volume knob shortly to achieve the
FM auto scan and save function, and short press to stop the function.
3. Press button shortly to get previous preset station, press button longer
time to start backward auto scan; short press button to get the next preset
station, press button longer time to forward auto scan; press shortly to be
mute the sound output; turn volume knob to adjust the volume output.
4. In FM mode, turn the time adjustment knob to clockwise or counterclockwise will
increase or decrease the FM frequency in 0.1MHz.
Important: for PP25, you can press and hold the volume knob 2 seconds, then turn
the knob to clockwise or count -clockwise in order to increase or decrease the FM
frequency in 0.1 MHz; press and hold the volume knob 2 seconds again will resume
to volume adjustment function.
12