Owner`s manual

PP20 / PP25

REMOTE CONTROL

REPEAT MODE SLECTION

STANDBY ON/OFF

ADJUST THE BRIGHTNESS

OF LCD: 3 LEVELS

FM PRESET STATION MEMORY

PAUSE/PLAY

VOLUME UP ADJUSTMENT

VOLUME DOWN ADJUSTMENT

FM AUTO SCAN

PLAY SOURCE

PREVIOUS TRACK &

FM FREQUENCY

ADJUSTMENT

NEXT TRACK &

FM FREQUENCY

ADJUSTMENT

DIGITS KEYS

POWER SETTING AND BATTERY CHARGING

Before play the speaker, please follow up below step to mount the battery and

charge in order to give power. The unit has built-in re-chargeable battery inside.

1. Open the battery cover on the rear side of unit and mount the supplied 3.7V,

1000mAh lithium-ion rechargeable battery direct with voltage minus and plus

polarity correctly, then close the battery cover.

2. Using the supplied USB cable to connect the DC 5V socket on the rear panel, and

another terminal connect with supplied USB DC power adaptor. Then plus on the DC

power adaptor with AC power source.

3. During the charging, the rear panel red LED indicator will turn on, and will off after

be fully charged (4~6 hours charging time).

4. During the battery power playback mode, the unit will stop and display off if the

power is too low. And a buzz sound will ring up 3 times and power off. Please connect

power for re-charging and playing.