Operation Manual

PP15DAB
USB/SD OPERATION
1. Press and hold the / OK button to turn on the unit during standby mode.
2. Connect your USB device or SD/MMC card to the unit.
3. Short press the M button to select “USB” or “SD” mode, the relevant “USB” or “CARD” icon
appears on the display. The USB or SD/MMC card will start playing automatically once the
contents scanning is finished.
- Press /OK button to pause or resume playback.
- Press “>”button to skip to next track or press “<” button to previous track.
- Press “PRESET” button to change the repeat mode between Repeat-1 and Repeat All
(default repeat mode).
- To remove your USB device or SD/MMC card, simply stop the playback and gently unplug
it from the connector.
AUX-IN (LINE IN) OPERATION
Aux In mode plays audio from an external source such as an MP3 player.
1. Plug one end of the 3.5mm audio cable (included) into the headphone or line out jack
on your player, plug the other end of cable into the unit AUX-IN jack on the back of the
unit.
2. Turn on the external audio source and play your device.
3. Press and hold the / OK button to turn on the unit during standby mode.
4. Short press the M button until the “Auxiliary Input Mode” appears on the display to
select AUX-IN mode.
5. The volume level can now be controlled through the main unit. Operate all other
functions on the external device as usual.
Notes:
1). If you're connected to the Line out Jack of your external device, then you only need to
adjust the volume control of this unit. If you're connected to the Headphone Jack of your
external device, then you may need to adjust both the volume control of your external
device and the volume control of this unit to find the most desirable volume setting.
2). Slide the Power ON/OFF switch to OFF position to turn off the unit when you finish
listening. Don't forget to switch off the power of your external device as well.
17