Operation Manual

PP15DAB

LISTEN TO FM RADIO

FM radio mode receives analogue radio from the FM band (87.5-108MHz) and display RDS

(Radio Data System) information about the station.

1. Fully extend the telescopic antenna.

2. Press and hold the / OK button to turn on the unit during standby mode.

3. Short press the M button to select FM mode.

4. Press the SCAN button or press and hold the “<”/ “>” button to search the station, it will

then stop automatically at the first station it finds.

5. Short press “<” or “>” button to tune the radio up or down in 50 KHz steps for fine tuning.

6. If the reception is too weak and there is noise on the received station, try to improve the

reception by changing the position of the telescopic antenna

Station presets

The unit allows you to store up to 20 FM stations which work in the same way as described

in DAB mode.

Now playing information

While FM radio is playing, the screen shows its frequency, or if RDS information is

available, station name and any further ‘RadioText’ information. If no information is

available, just the frequency and a No Radio Text message is shown.

To view further information about the broadcast

Each time you press INFO button, the next set of information is displayed, cycling

through: RDS RadioText, programme type, frequency, mono/stereo, time and date.

Press and hold the INFO button to return to the default Now playing screen.