Operation Manual

PP15DAB

5. To change the station, press “<” or “>” button to scroll through the list of stations and

press OK button to tune to the displayed station. The Now playing screen is displayed

with the new station details.

6. If no stations are detected during the scan the display will show “NO DAB Station”.

Notes:

1. Just like Digital TV there are some areas where it may still be difficult to get a good DAB

signal. The broadcasters are constantly improving DAB coverage, so in some cases it may

be necessary to wait before some or all DAB services become available. You can check

coverage for your area.

2. You may also need to start a scan manually to update the list of stations for one of the

following reasons:

- New stations may become available from time to time.

- Stations close or can no longer be received (In the station list, invalid stations are

indicated with a question mark “?” in front of their name).

- If reception was not good for the original scan (for example the antenna was not up), this

may result in an empty or incomplete list of available stations.

- If you have poor reception of some stations causing the audio to break up, you may wish

to list only stations with good signal strength.

How to re-do a full scan

To re-do a full scan, you may either short press the SCAN button or press the MENU

button to show the menu and then press OK button to select Full Scan.

Manual Tune

As well as the normal method of scanning, you can also manually tune to a particular

channel/frequency. This can be useful for adjusting your antenna to achieve the best

possible reception and scanning a particular channel to update the station list.

1. Press Menu button and then press “>” to show the submenu: Manual tune, press the OK

button to enter.

2. Press “<” or “>” to display a particular channel/frequency, press OK button to tune to

that channel/frequency. The display shows a live indication of the received signal

strength on the selected frequency. Adjustments to your antenna will be manifested in

the received signal strength displayed.