Operation Manual

PP15DAB

GENERAL OPERATION

Switch the unit on/off

- Switch the unit on by sliding the Power ON/OFF switch on the back of the unit to ON

position, the display on the unit will light and display “Time is not set”, meanwhile, the

time digits “00:00” flashes in the display. Now you can set the time and date manually by

pressing & holding the MENU button, select a value for each parameter in turn by using >

or < button and then press MENU to confirm and move on to the next parameter.

- Standby/operating mode: You may then toggle between standby and operating mode

by pressing & holding the / OK button.

- To switch off the unit, slide the Power ON/OFF switch to OFF position.

Notes:

1. When the unit is powered on the first time, it will enter DAB mode as default, press the

M button to change the operating mode circularly: DAB, FM, USB, SD, AUX-IN, Bluetooth.

2. Time and date can automatically update on-air when the DAB radio is operated.

Anyway, it also can be set manually in Standby mode.

3. ECO design: the unit turns to Standby mode automatically if it is not providing the main

functions or inappropriate for the intended use for 60 minutes during any operating

mode (except for FM mode).

4. The display light will dim after 10 seconds automatically during Standby mode.

LISTEN TO DAB+/DAB RADIO

DAB radio mode receives DAB/DAB+ digital radio and displays information about the

station.

Auto Scan

1. Fully extend the telescopic antenna.

2. Press and hold the / OK button to turn on the unit during standby mode.

3. Press the M button to select DAB mode. For the first time use or if the station list is

empty, the radio automatically performs a full scan to see what stations are available, the

display shows the scan progress and the total channel number during the scanning.

4. When the scan progress is completed, it will then set the time and start playing the first

station on the station list it finds.