Radio CD MP3 WMA Orlando MP46 7 646 480 310 Operating instructions http://www.blaupunkt.com 01OrlandoMP46_d.indd 1 01.03.
1 2 3 4 5 6 7 8 9 10 11 12 2 01OrlandoMP46_d.indd 2 01.03.
Controls 1 On/Off button Short press: Mutes the device. Long press: Switches the device off. 2 button to open the flip-release control panel. 3 Volume control 4 SOURCE button to switch sources between radio, CD, CD changer (if connected) and AUX. 5 AUDIO button to adjust bass, treble, middle, subout, balance and fader. Switching X-BASS on/off and adjusting it. Selects an equalizer presetting. 8 DISPL button Short press: Briefly displays alternative display contents (e.g. time).
Notes and accessories...................... 43 Disposal of old unit (EU countries only) ........................ 43 Installation.................................... 43 Optional equipment(not part of the scope of delivery) ..................... 43 Detachable control panel ................. 44 Theft protection............................. 44 Detaching the control panel ............. 44 Attaching the control panel.............. 45 Switch-off time (OFF TIMER) ........... 45 Switching on/off ....................
Contents CD changer mode ............................ 65 Switching to CD changer mode ........ 65 Selecting CDs................................ 65 Selecting tracks ............................. 65 Fast seek tuning (audible) ............... 65 Repeating individual tracks or whole CDs (REPEAT) ...................... 65 Random track play (MIX) ................. 65 Scanning all tracks on all CDs (SCAN)...66 Interrupting playback (PAUSE)......... 66 Clock time .......................................
Notes and accessories Thank you for choosing a Blaupunkt product. We hope you enjoy using this new piece of equipment. Please read these operating instructions before using the equipment for the first time. The Blaupunkt editors are constantly working on making the operating instructions clearer and easier to understand. However, if you still have any questions on how to operate the device, please contact your dealer or the telephone hotline for your country.
Notes and accessories Amplifier You can use all Blaupunkt and Velocity amplifiers. CD changers You can connect the following Blaupunkt CD changers: CDC A 03, CDC A 08 and IDC A 09. Control panel Detachable control panel Theft protection The device is equipped with a detachable control panel (flip-release panel) as a way of protecting your equipment against theft. The device is worthless to a thief without this control panel.
Control panel Attaching the control panel 쏅 Hold the control panel approximately at a right angle to the device. 쏅 Slide the control panel into the device’s guides that are positioned on the left and right at the lower edge of the housing. Push the control panel carefully into the bracket until it clicks into place. 쏅 Carefully flip up the control panel until it clicks into place. Switch-off time (OFF TIMER) After opening the control panel, the device is switched off after an adjustable time.
Switching on/off Volume Switching on/off Adjusting the volume There are various ways of switching the device on/off: You can adjust the volume in increments from 0 (off) to 66 (maximum). To increase the volume, 쏅 turn the volume control 3 clockwise. To decrease the volume, 쏅 turn the volume control 3 counterclockwise. Switching on/off using button 1 쏅 To switch on the device, press button 1. The device switches on. 쏅 To switch off the device, press and hold down button 1 for longer than two seconds.
If you enable "LAST VOL", the volume which was set the last time you switched off the device is re-enabled. Note: To protect your hearing, the power-on volume is limited to the value "38". If the volume before switching off was higher and the "LAST VOL" setting was selected, the device switches on again with the value "38". When you have finished making your changes, 쏅 press the MENU button 9 three times. Quickly reducing the volume (Mute) You can quickly reduce the volume to a preset level (Mute).
Volume 쏅 Press the MENU button 9. 쏅 Press the or button : repeatedly until "VOLUME MENU" appears on the display. button : to open the 쏅 Press the menu. 쏅 Press the or button : repeatedly until "TEL VOL" appears on the display. 쏅 Set the desired volume with the or button :. When you have finished making your changes, 쏅 press the MENU button 9 three times. Note: You can use the volume control 3 to adjust the volume of telephone calls and navigation announcements whilst you are listening to them.
Radio mode This device is equipped with an RDS radio receiver. Many of the receivable FM stations broadcast a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears on the display as soon as the tuner receives it. Adjusting the tuner To ensure proper functioning of the tuner, the device must be set for the region in which it is being operated.
Radio mode Switching REGIONAL on/off 쏅 Press the MENU button 9. "USER MENU" appears on the display. 쏅 Press the or button : repeatedly until "TUNER MENU" appears on the display. button : to open the 쏅 Press the menu. 쏅 Press the or button : repeatedly until "REG" appears on the display. "OFF" or "ON" is displayed alongside "REG". To switch REGIONAL on/off, 쏅 press the or button :. When you have finished making your changes, 쏅 press the MENU button twice 9.
Browsing through broadcasting networks (FM only) If a radio station provides several programmes, you have the option of browsing through its so-called "broadcasting network". Note: The convenient RDS function must be activated before you can use this feature. 쏅 Press the or button : to change to the next station of the broadcasting network. Note: When using this feature, you will only be able to switch to stations that you have received once before already.
Radio mode The storing procedure begins. "FM TRAVELSTORE" appears on the display. After the process has completed, the radio will play the station that is stored in memory location 1 of the FMT memory bank. Listening to stored stations 쏅 Select the memory bank or waveband. 쏅 Press one of the station buttons 1 - 6 ;. The stored station is played if it can be received. Scanning receivable stations (SCAN) You can use the scan function to play all the receivable stations briefly.
Radio mode Notes: • If the tuner does not find a station that corresponds to the selected programme type, you will hear a beep and "NO PTY" appears briefly in the display. The radio will then retune to the station that it received last.
Radio mode The selected programme type appears briefly on the display. 쏅 Press the or button : to start seek tuning. The radio will then tune into the next station that it finds that corresponds to your selected programme type. Assigning a programme type to a station button 쏅 Select a programme type using the or button :. 쏅 Press and hold the desired station button 1 - 6 ; for longer than two seconds. The programme type is stored on the selected button 1 - 6 ;.
Traffic information Your device is equipped with an RDS-EON receiving unit. EON (Enhanced Other Network) ensures that whenever a traffic announcement (TA) is broadcast, the system switches automatically from a station that does not provide traffic reports to the appropriate traffic information station within the broadcasting network that does. Once the traffic announcement has been played, the system will switch back to the programme that you were listening to before.
CD mode CD mode You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 cm. To avoid problems when playing self-burned CDs, you should not burn CDs at speeds greater than 16-speed. Risk of severe damage to the CD drive! CD singles with a diameter of 8 cm and noncircular contoured CDs (shape CDs) must not be used. We accept no responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. The drive draws in the CD automatically.
Fast seek tuning (audible) To fast seek tuning backwards or forwards, 쏅 press and hold down the or button : until fast seek tuning backwards / forwards begins. Random track play (MIX) 쏅 Press the 5 MIX button ;. "MIX DISC" appears briefly on the display and the MIX symbol is displayed. The next randomly selected track will then be played. Cancelling MIX 쏅 Press the 5 MIX button ; again. "MIX OFF" appears briefly on the display and the MIX symbol disappears.
CD mode Configuring the display You can choose from various display options in CD mode: • "Normal Mode": First line: Track number and playing time. • "Info Mode": First line: Track number and playing time Second line: CD text time • "Clock Mode": First line: Track number and playing time Second line: CD text time and time Notes: • You can define in the menu whether the CD text is displayed. For further details, please read the following section entitled “Displaying CD text”.
MP3/WMA mode Ejecting a CD MP3/WMA mode 쏅 Press the button 2. The control panel opens out towards you. You can also use this car sound system to play CD-Rs and CD-RWs that contain MP3 music files. You can also play WMA files. The operation for playing MP3 and WMA files is identical. 쏅 Press the eject button < next to the CD slot. The CD is ejected. 쏅 Remove the CD and close the control panel. Notes: • If a CD is ejected, the drive will automatically draw it back in again after 10 seconds.
MP3/WMA mode This device supports as many subdirectories as your burner software can create despite the fact that the maximum directory depth defined by the ISO 9660 standard is only 8. D01 A D02 D03 T001 T002 T003 T004 T005 T001 T002 T003 T004 T005 T006 D04 T001 T002 T003 T004 T005 T006 T007 T008 T009 T010 T011 B A Directories B Tracks · Files You can name each directory using a PC. The device is capable of displaying the directory name.
MP3/WMA mode MP3 mode is activated in the same way as normal CD mode. For further details, please read the section entitled "Switching to CD mode" in the "CD mode" chapter. Configuring the display Configuring the default display You can display various types of information on the current track: 1. Normal Mode: First line: Track name Second line: MP3 information Note: The content of the MP3 information is dependent upon the settings in the "MP3 DISP" menu. 2.
MP3/WMA mode To switch between the different display options, 쏅 press the MENU button 9. 쏅 Press the or button : repeatedly until "VARIOUS MENU" appears on the display. 쏅 Press the button : to open the menu. 쏅 Press the or button : repeatedly until "MP3 DISP" appears on the display. 쏅 Press the button : to open the menu. 쏅 Select the desired MP3 scrolling text with the or button :. When you have finished making your changes, 쏅 press the MENU button 9 three times.
MP3/WMA mode Selecting tracks/files using the arrow buttons (Normal, Clock and Info mode) To move up or down to another track/file in the current directory, 쏅 press the or button : once or several times. If you press the button : once, the current track is played again from the beginning. Selecting tracks in browse mode Browse mode conveniently allows you to view the tracks contained in a directory and then select a particular track.
MP3/WMA mode Note: You can set the scanning time. For further information on setting the scanning time, please read the section entitled "Setting the scanning time" in the "Radio mode" chapter. Cancelling Scan and continuing listening to a track 쏅 Briefly press the MENU button 9. The currently scanned track will then continue to be played normally. Interrupting playback (PAUSE) 쏅 Press the 3 button ;. "PAUSE DISC" appears on the display. Cancelling pause 쏅 During the pause, press the button 3 ;.
CD changer mode Note: Information on handling CDs, inserting CDs and operating the CD changer can be found in the operating instructions supplied with your CD changer. Switching to CD changer mode 쏅 Press the SOURCE button 4 repeatedly until "CHANGER" appears on the display. The device starts playing the first CD that the CD changer detects. Selecting CDs To move up or down to another CD, 쏅 press the or button : once or several times.
CD changer mode Cancelling MIX 쏅 Briefly press the 5 MIX button ;. "MIX OFF" appears and MIX on the display disappears. Scanning all tracks on all CDs (SCAN) To scan (briefly play) all the tracks on all the inserted CDs in ascending order, 쏅 press the MENU button 9 for longer than two seconds. The display shows "SCAN TRACK". The CD number and the track number are displayed next. The track number flashes. Stopping Scan To stop scanning, 쏅 briefly press the MENU button 9.
Clock time 쏅 Press the MENU button 9. 쏅 Press the or button : repeatedly until "CLOCK MENU" appears on the display. 쏅 Press the button : to open the menu. 쏅 Press the or button : repeatedly until "24 HR MODE" or "12 HR MODE" appears on the display. 쏅 Press the or button : to switch between modes. When you have finished making your changes, 쏅 press the MENU button twice 9. When you have finished making your changes, 쏅 press the MENU button twice 9.
Sound Sound Adjusting the middle You can perform the sound settings (bass, middle, treble and sub-out) separately for every source (radio, CD, CD changer, AUX, traffic announcement and telephone/navigation). The volume distribution settings (balance and fader) apply to all the audio sources. You can select 1 of 4 centre frequencies (500 Hz, 1 kHz, 2 kHz, 3 kHz). In addition, you can adjust the level between ±7 for the selected centre frequency.
쏅 Press the or button : repeatedly until the desired centre frequency appears on the display. 쏅 Press the or button : to adjust the level between ±7. 쏅 Press the AUDIO button 5 twice to exit the menu. Setting the left/right volume distribution (balance) To adjust the left/right volume distribution (balance), 쏅 press the AUDIO button 5. "BASS" appears on the display. 쏅 Press the or button : repeatedly until "BAL" appears on the display with the current setting.
Preamplifier output 쏅 Press the or button : repeatedly until "SUBOUT" appears on the display. 쏅 Press the or button : once. 쏅 Press the or button : repeatedly until the desired frequency appears on the display. When you have finished making your changes, 쏅 press the AUDIO button 5 twice. X-Bass X-BASS X-Bass allows you to increase the bass at low volume. The selected X-Bass setting is effective for all audio sources (radio, CD, CD changer or AUX). The X-BASS increase can be set in increments of 1 to 3.
Equalizer This device features an equalizer in which the settings for the music genres "ROCK", "POP" and "CLASSIC" are already programmed. To select an equalizer setting, 쏅 press the AUDIO button 5. "BASS" appears on the display. 쏅 Press the or button : repeatedly until "POP", "ROCK", "CLASSIC" or "EQ OFF" appears on the display. 쏅 Press the or button : to select one of the settings or select "EQ OFF" to switch off the equalizer. The selected setting is permanently shown on the display.
Display Adjusting the display brightness If your car sound system is installed as described in the installation instructions and your vehicle features the corresponding connection, the display brightness is switched with the driving lights. The display brightness can be adjusted separately for day and night in increments from 1 - 9. In addition, you can select the "AUTO DIM" setting for the night dimmer (DIM NIGHT).
Adjusting a positive or negative display presentation You can adjust whether the display contents should be displayed in the positive or negative mode. 쏅 Press the MENU button 9. 쏅 Press the or button : repeatedly until "DISPLAY MENU" appears on the display. button : to open the 쏅 Press the menu. 쏅 Press the or button : repeatedly until "POSITIVE" or "NEGATIVE" appears on the display. 쏅 Press the or button : to select among the modes.
Display 쏅 Press the or button : repeatedly until "COL SCAN" appears on the display. 쏅 Press the or button : to start the colour seek. The device starts changing the display illumination colour. If you want to adopt the currently set colour, 쏅 press the MENU button 9 once. To start the seek tuning again, 쏅 Press the or button :. If you found the desired colour, 쏅 press the MENU button twice 9.
Note: If the AUX input is switched on, you can select it by pressing the SOURCE button 4. Adjusting the AUX preamplification To be able to adjust for differences in volume, the level adjustment of the AUX input can be adjusted in 4 increments (0 to 3). 쏅 Press the MENU button 9. 쏅 Press the or button : repeatedly until "AUX MENU" appears on the display. button : to open the 쏅 Press the menu. 쏅 Press the or button : repeatedly until "AUX LVL" appears on the display. button : to open the 쏅 Press the menu.
Technical data Technical data Amplifier Output power: 4 x 18 watts sine at 14.4 V and 1% distortion factor at 4 ohms. 4 x 26 watts sine in accordance with DIN 45324 at 14.4 V at 4 ohms. 4 x 50 watts max. power Tuner Wavebands: FM : 87.5 - 108 MHz MW : 531 - 1,602 kHz LW : 153 - 279 kHz FM frequency response: 35 - 16,000 Hz CD Frequency response: 20 - 20,000 Hz Pre-amp out 4 channels: 2V Input sensitivity AUX input: Tel./Navi input: 2 V / 6 kΩ 10 V / 1 kΩ Weight 1.
Bitte den ausgefüllten Gerätepass sicher aufbewahren! Please keep the filled-in radio pass in a safe place! Prière de conserver soigneusement la carte d’autoradio remplie ! Tenete per favore il libretto di apparecchio, debitamente riempito, in un posto sicuro! Bewaar de ingevulde apparaatpas op een veilige plaats! Vänligen förvara ifyllt apparatpass på säker plats! ¡Favor guardar el documento del aparato debidamente llenado en un lugar seguro! Por favor, guardar o cartão preenchido do aparelho num lugar segu
Country: Germany Austria Belgium Denmark Finland France Great Britain Greece Ireland Italy Luxembourg Netherlands Norway Portugal Spain Sweden Switzerland Czech. Rep.
