Operating instructions

38
Bluetooth mode
The Bluetooth® function allows registering cell phones
and media playback devices with the NewYork.
When you register a cell phone with the NewYork, you
can make phone calls with the built-in hands-free func-
tion. You can access the lists of dialled numbers and the
phone book of the registered cell phone.
If the connected Bluetooth® device supports the func-
tions A2DP and AVRCP, you can play the music via the
New York unit and control the playback. During a call, the
music playback is interrupted and continued again after
the call.
If a cell phone is registered via Bluetooth® and a call is re-
ceived during the playback of another source, the source
playback is interrupted and the call menu is displayed.
Starting Bluetooth mode
쏅 In the main menu, press on Bluetooth.
- Or -
쏅 Press the MENU button
2 for approx. 2 seconds.
(Prerequisite: This function is assigned to the button
in the settings menu.)
The Bluetooth® menu is displayed. It contains the list
of known Bluetooth® devices. Other audio sources
are switched o .
[ ] Change to next higher level.
[
] Move selection mark.
[
] Move selection mark.
[
] Disconnect connection to marked device.
[
] Delete marked device from the list.
[
] Display options menu.
쏅 Double-click on the name of the Bluetooth® device
with which you want to establish a connection.
When the device is in range, the connection is estab-
lished and the menu for the device is displayed.
Registering Bluetooth devices
If you want to register a device with the New York for the
 rst time, proceed as follows:
쏅 Ensure that Bluetooth® is activated at the New York
and at your Bluetooth® device.
쏅 In the options menu of the Bluetooth® mode, enter a
pairing code (see Bluetooth® settings).
쏅 Search for new devices/connections on your Blue-
tooth® device.
쏅 The New York appears as "New York" in the list of
Bluetooth® devices.
쏅 Establish the connection; you may have to enter the
pairing code that was previously de ned on the New
York.
The connection is being established and the menu
for the registered device is displayed.
Note:
If a telephone is connected with the New York unit,
the Bluetooth® icon
is displayed at the top right
edge of the display in all audio/video sources.
Telephone mode - Bluetooth
If you registered a phone with the New York via Blue-
tooth®, the following menu appears.
[ ] Change to next higher level.
[
] Move selection mark.
[
] Move selection mark.
[
] Disconnect connection with current device.
[
] Display keypad to directly enter a phone
number
[
] Display options menu.
쏅 Select a contact/number via the call lists or the phone
book and double the entry twice (double-click).
The connection is being established.
Bluetooth mode