Operating instructions

29
DEUTSCHENGLISH
The options menu is displayed, the current setting is
shown after RDS.
쏅 In the options menu, press the RDS button to change
the setting.
쏅 Press the 
 button.
The radio menu is displayed again.
Switching RDS time signal on/o
The time can be synchronised with the time data trans-
mitted via RDS.
쏅 In the radio menu, press the 
 button.
쏅 In the options menu, press the RDS Clock Time but-
ton to change the setting.
쏅 Press the 
 button.
The radio menu is displayed again.
Optimising radio reception
The HICUT function causes a reception improvement in
case of poor radio reception (in FM radio mode only). If
reception interferences exist, the interference level is au-
tomatically decreased.
쏅 In the radio menu, press the 
 button.
쏅 In the options menu, press the HICUT button to
change the setting.
쏅 Press the 
 button.
The radio menu is displayed again.
Switching the REG function (regional
programmes) on/o
Some RDS stations divide their programmes into region-
al programmes with di erent contents at certain times.
If the REG function is activated, the car sound system
changes only to those alternate frequencies of the set
station on which the same regional programme is being
broadcast.
쏅 In the radio menu, press the REG button to switch
the REG function on or o .
The REG button is illuminated if the REG function is
switched on.
Switching the AF (alternative frequencies)
function on/o
If the AF function is activated, the car sound system auto-
matically tunes into the best receivable frequency for the
station that is currently set.
쏅 In the radio menu, press the AF button to switch the
AF function on or o .
The AF button is illuminated if the AF function is
switched on.
Adjusting the seek tuning sensitivity
The seek tuning sensitivity decides whether the auto-
matic station seek tuning  nds only strong stations or
also weaker stations that may be noisy.
쏅 In the radio menu, press the Loc button to set the
sensitivity of the station seek tuning.
If the Loc button is illuminated, the seek tuning lo-
cates only strong stations.
Tra c information
In the reception region Europe, an FM station can iden-
tify tra c announcements via an RDS signal. If priority for
tra c reports is switched on, a tra c report is automati-
cally switched through, even if the car sound system is
currently not in radio mode.
Note:
The volume is increased for the duration of the
switched-through tra c announcement. You can ad-
just the minimum volume for tra c announcements.
Switching priority for tra c announcements on/o
쏅 In the radio menu, press the TA button to switch the
priority for tra c announcements on or o .
The TA button is illuminated if the priority for tra c
announcements is switched on.
Setting the minimum volume for tra c
announcements
쏅 In the radio menu, press the   button.
쏅 In the options menu, press the TA VOL button.
쏅 Adjust the desired volume with the 
 or   but-
ton.
쏅 Press the 
 button.
The radio menu is displayed again, the set volume
is stored.
Radio mode