Operation Manual

21
General
The following settings are possible:
Radio region – Select the reception region for the radio
reception.
Background light o – If this value is set, the display of
the radio is completely switched o after 10 or 20 sec.
without use.
Dimmer mode – Adjust the display brightness
Beep – Switch con rmation beep on/o
Wallpaper – Select the wallpaper for menus. Various mo-
tifs can be selected in the device. You can also select your
own images which you previously stored on the MicroSD
card.
Calibration – The touchscreen can be calibrated here.
SWC – The buttons of a connected steering wheel con-
trol can be con gured here.
Softkey MENU – Here, you can assign a function to the
MENU button
2 if it is pressed for approx. 2 seconds.
Select between the options Start Bluetooth® mode and
Switch o display.
Theft protection – Activate/deactivate the code query.
If the code query is activated, the four-digit code num-
ber must be re-entered every time the device is discon-
nected from the vehicle system voltage (e.g. removal of
the battery for repairs).
Security code – You can change the code number. To
change the code number, enter the four-digit code num-
ber. The code number is set to 0000 at the factory.
Load factory – Resets all personalised settings. With the
exception of the personally selected security code.
Time
The following settings are possible:
Date – Set the date
Clock mode – Selection between 12 and 24-h mode
Time – Set the time
Sound
The following settings are possible:
Subwoofer – Switch subwoofer on/o
Subwoofer  lter – Make the setting according to the
subwoofer used (settings: 80/120/160 Hz).
Dynamic bass boost – Switch dynamic bass on/o
Basic settings