Technical data

82
Tuner mode
In regular tuner mode, "Norm" is displayed on the
left side in the menu selection
F.
To change from regular tuner mode to menu
mode and back,
press the DIS•ESC button ;.
In menu mode, "List" is displayed in the menu se-
lection
F instead of "Norm". The "List" menu (list
of stored stations) is selected. The options of the
"List"
G menu are displayed
GF
F Menu selection
G Options of the current menu
You can switch between the menus with the rock-
er switch
or @. The options of the respec-
tive
G menu are displayed.
Setting the waveband/ memory bank
You can adjust and set radio stations of the FM,
MW and LW wavebands.
The wavebands MW and LW each provide one
memory bank with 10 memory locations each.
The FM waveband features 2 memory banks each
with 10 memory locations each: FM and FMT .
Press the TUNER button =.
OR:
To change to the menu mode, press the
DIS•ESC button ;.
Press the rocker switch
@ twice to open
the "Band" menu.
Press the rocker switch
or @ to select
the desired waveband or memory bank.
Press the OK button :.
쏅
쏅
쏅
쏅
쏅
쏅
The desired waveband or memory bank is adjust-
ed. After a short period of time, the display auto-
matically returns to the regular tuner mode.
You can now perform the following actions in this
waveband/memory bank:
Adjusting stations
Storing stations
Adjusting stations
There are 3 ways of tuning into a station :
Tuning into stations automatically (station
seek tuning)
Tuning into stations manually
Selecting stored stations
Station seek tuning
Press the rocker switch
or @.
If you press and hold the rocker switch
or
@ automatic seek tuning skips the stations
found until you release the rocker switch again.
The tuner searches for the next receivable station
in the current waveband. The adjusted sensitivity
of the station seek tuning (section "Changing the
seek tuning sensitivity") and the following set-
tings are taken into consideration:
The "PTY TYPE" (programme type) setting in
the "TUNER" menu: The tuner searches for
stations that are broadcasting the defi ned
programme type.
The "TRAFFIC" (traffi c information) setting
in the "TUNER" menu: With priority for traffi c
announcements, the tuner exclusively
adjusts traffi c information stations.
Note:
These settings are available only for FM.
An exact description of these settings can
be found in the following sections of this
chapter.
•
•
•
•
•
쏅
•
•
02_NJerseyMP68_gb.indd 8202_NJerseyMP68_gb.indd 82 29.10.2008 10:59:54 Uhr29.10.2008 10:59:54 Uhr