Operation Manual

44
Gently insert the CD with its printed
side uppermost into the drive until you
feel some resistance.
The drive draws in the CD automatically.
You must not hinder or assist the drive as it
draws in the CD.
Gently close the control panel whilst
exerting a little pressure until you feel
it click into place.
The CD starts playing.
Note:
If the vehicle ignition was switched
off prior to inserting the CD, you must
switch the device on fi rst with the On/
Off button 6 to start the playback.
If a CD is already inserted in the drive,
press the SRC button 4 repeatedly
until the "CD symbol" appears on the
display.
The playback starts with the track played
last.
Selecting tracks
Press the ? or button @ to
select the next or previous track.
If you press the
button @ once, the
current track will be played again from the
beginning.
Fast searching (audible)
To fast search backwards or forwards,
press and hold down the
? or
button @ until fast searching back-
wards or forwards begins.
쏅
쏅
쏅
쏅
쏅
Random track play (MIX)
To play back all the tracks of a CD at ran-
dom,
press the 4 MIX button =.
The display shows "MIX".
The next randomly selected track will then
be played.
Cancelling MIX
Press the 4 MIX button = again.
The MIX symbol disappears.
Normal playback is then resumed.
Scanning tracks (SCAN)
You can scan (briefl y play) all the tracks on
the CD.
Press the 2 SCN button =.
The display shows "SCN".
The next track will then be scanned.
Stopping Scan
To end the scanning process,
press the 2 SCN button =.
The SCN symbol disappears.
The currently scanned track will then con-
tinue to be played normally.
Adjusting the scan time for SCAN
You can adjust the scan time for the SCAN
function in the menu.
Press the MENU button 3.
Press the
or button 2 repeatedly
until "SCAN" appears on the display.
Press the
? or button @ to
select either 5, 10 or 20 seconds.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
CD mode
02MilSRemMCarlMP28_gb.indd 4402MilSRemMCarlMP28_gb.indd 44 30.01.2008 11:26:11 Uhr30.01.2008 11:26:11 Uhr