Technical data

7
Placing the device in operation | Tra c information | Radio mode
Helsinki 220 BT and Sydney 220 BT
쏅 Press and hold the buttons
7 and =
at the same time and press the On/O but-
ton 3 .
The car sound system switches on. The display
brie y shows "DEMO MODE" if you switched
on the demo mode. By pressing any button,
the demo mode is interrupted and you can
operate the device.
Tra c information
In the reception area "EUROPE", an FM station can
identify tra c reports by means of an RDS signal.
If priority for tra c reports is switched on, a traf-
 c report is automatically switched through, even
if the car sound system is currently not in radio
mode.
If priority is switched on, the display shows the
tra c jam symbol (
). "TRAFFIC" is displayed
during a switched-through tra c announcement.
The priority is activated and deactivated in the
user menu (see the chapter "User settings", sec-
tion "Making settings in the "TUNER" menu", menu
item "TRAFFIC").
Notes:
• The volume is increased for the duration
of the switched-through tra c announce-
ment. You can adjust the minimum volume
for tra c announcements (see the chapter
"User settings", section "Making settings
in the "VOLUME" menu", menu item "TA
VOLUME").
• To cancel a switched-through tra c an-
nouncement, press the DIS button
A .
Radio mode
RDS
Many FM stations broadcast an RDS (Radio Data
System) signal in addition to their programme
in the reception area "EUROPE" that allows the
following additional functions:
• The station name is shown on the display.
• The car sound system recognises tra c an-
nouncements and news broadcasts and can
automatically switch them through in other
operating modes (e. g. in CD mode).
• Alternate frequency: If RDS is activated, the car
sound system automatically selects the best
receivable frequency for the station that is cur-
rently set.
• Regional: At certain times, some radio sta-
tions divide their programme into regional
programmes providing di erent content. If
the REGIONAL function is activated, the car
sound system changes only to those alternate
frequencies on which the same regional pro-
gramme is being broadcast.
The functions RDS and REGIONAL are activated
and deactivated in the user menu (see the chap-
ter "User settings", section "Making settings
in the "TUNER" menu", menu items "RDS" and
"REGIONAL").
Changing to radio mode or selecting
a memory bank
The following memory banks are available in the
di erent reception areas:
Region Memory banks
EUROPE FM1, FM2, FMT, MW
USA FM1, FM2, FMT, AM, AMT
S-AMERICA FM1, FM2, FMT, AM, AMT
THAILAND FM1, FM2, FMT, AM, AMT
쏅 Press the SRC button
@ repeatedly until the
desired memory bank is displayed.