Operating instructions

22
Thank you for deciding to purchase a
Blaupunkt product. We hope you enjoy
using this new piece of equipment.
Before using the device, please read
these instructions carefully. The
Blaupunkt editors are constantly work-
ing on making the operating instructions
clearer and easier to understand. How-
ever, if you still have any questions on
how to operate the unit please contact
your dealer or the telephone hotline for
your country. You will find the hotline
telephone numbers printed at the back
of this booklet.
Road safety
Road safety has priority. Only
operate the unit if the road and traf-
fic conditions allow you to do so. Fa-
miliarize yourself with the unit before
setting off on your journey.
You should always be able to hear
police, fire and ambulance sirens
from afar. For this reason, set the
volume of whatever you are listen-
ing to to a reasonable level.
Risk of injury. The DVP 01 is a
CLASS 1 laser product. Never look
at the laser beam. Never try looking
inside the unit’s housing. Never open
the unit’s housing.
Never expose the DVP 01 to di-
rect sunlight or ambient tempera-
tures over 80°C since this could re-
sult in damage to the DVP 01 and
the DVD.
INFORMATION
Installation
Mounting
If you want to install the DVP 01 your-
self, please use the supplied installa-
tion brackets. The DVP 01 can be in-
stalled in any position.
Note
Use the supplied screws when in-
stalling the DVP 01. Other screws
could damage parts inside the DVP
01.
Please make sure that the connected
cables are not squashed when in-
stalling the DVP 01.
If you install the player with its un-
derside facing upwards, the DVD
may fall out when the drive compart-
ment is opened.
Electrical connection
If the AMP plug that is required for the
voltage supply connection is not already
integrated in the Blaupunkt connection
cable (special accessory from the “Pro-
fessional Line”), use the 4-pin AMP plug
and contacts that are included with the
player. When preparing the cable,
please make sure the polarity is correct.
Connect the cable to the voltage source
and insert the AMP plug into the DC
12 V/ 24 V S jack at the back of the
DVP 01.
INSTALLATION