Specifications

Vertical Installation .
l Confirm that Anti-Vibration
Switches on both left and
right sides are set to position V.
l Attach brackets (L) and (R)
using the hexagonal bolts
(M5 x 8).
l Attach brackets (L) and (R) to
their respective brackets (B)
using the hexagonal bolts
(M6 x 20) and the hexagonal
nuts (M6).
0
l Pull back the carpet and determine
where to attach the unit.
l Stick the suoolied double-sided tape
to the bottoi of the brackets (B) and
peel off the paper backing.
l Affix the unit to the floor by pressing
in place.
*,,,, Ant!-Vibration
Cs.,&4..%.
l Using a knife, cut “X”s in the carpet
directly above the brackets (B) bolts.
l Return the carpet to its original
position allowing the bolts to
protrude through.
Q
l Remove the hexagonal nuts and
take off the changer.
,
e
l Once more, use the hexagonal nuts
to attach the changer on top of the
carpet.
B