User Guide

13
FRANÇAIS ENGLISHESPAÑOL
PORTUGUÊS
INSTALLATION
2.
- Lift up the carpet and decide where
you want to mount the unit.
- Fasten the double-stick tape sup-
plied to the bottoms of the brackets
(B) and remove the protective back-
ing from the tape.
- Fasten the unit to the floor by press-
ing it down firmly.
3.
- Unscrew the hex nuts and remove
the CD changer.
4.
- Using a knife, cut through the carpet
directly above the bolts of the mount-
ing bracket (B).
- Replace the carpet in its original po-
sition, so that the bolts poke through
the carpet.
5.
- Using the hex bolts again, refasten
the changer on top of the carpet.