Technical data

Version: 04.12.2006 Bluetooth USB Interface 7 607 545 500 FAQ
Please understand that despite careful analyses and editing, Blaupunkt Page 7 / 23
is unable to guarantee that these FAQ pages are complete and free from errors.
No. Q
/
A
Question / Answer Applie
s to
HW
Applies to
app. SW
Applies
to BL
SW
applied.
(in the same way as with a PC after an
installation has been performed -> i.e. reboot
the system)
Top
A02 Q
Can I connect two Bluetooth devices at the same time
for hands-free telephoning and audio streaming?
0
A
No, only ONE Bluetooth device can be connected at any one time (this
device can, however, support both functions!).
Top
A03 Q
Can I display more than 7 characters from the
Bluetooth interface? During MP3 playback from
internal drives (e.g. CD, DVD, MemoryCard, ...) my car
radio displays the information using more than 7
characters on the display.
0
A
No. The "Disk Naming" function of the CDC interface is used to display
text. With this, the text length is restricted by the radio to 7 characters
and cannot be increased by the interface.
Top
A04 Q
Can I change the scroll speed of long texts? (*TXT)
0
A
No. The "Disk Naming" function of the CDC interface is used to display
text. These data are usually updated on the car radio's display only
once per second, which means that if the data transfer from the
interface to the car radio were to take place more quickly this would
lead to data losses.
Top
A05 Q
What do I need a configuration file for?
0
A
You might need a CONFIG.TXT configuration file in the BLAUPUNKT
directory on your USB stick for two reasons:
1. You have a car radio that behaves in a "special way" when
connected to the CDC interface and for technical reasons is not
fully supported by the basic configuration of the interface (for the
list see the configuration instructions
).
In this case you should load the stated configuration file to ensure
the interface works correctly with your car radio.
2. You have a car radio that supports the "Disk Naming" function
(*TXT, see configuration instructions
) and thus allows text displays
from the CDC interface.
In this case you have the option to load a configuration file to
adapt the (display) behavior of your interface to suit your personal
preferences (playlist names, directory names, file names, ID3 tag
data (if contained in the MP3 files)).
Note:
If a RESET of the interface is performed (i.e. deletion of all personal
and connection data) the configuration data are also deleted. We
therefore recommend you keep your personal configuration
permanently in the BLAUPUNKT directory on the USB stick. This will
ensure the interface can restore your preferred configuration after a
RESET.
Top
A05 Q
What happens if I do not delete the SETUP.HEX file?
0
A
The SETUP.HEX file in the BLAUPUNKT directory on your USB stick