Technical data

Version: 04.12.2006 Bluetooth USB Interface 7 607 545 500 FAQ
Please understand that despite careful analyses and editing, Blaupunkt Page 5 / 23
is unable to guarantee that these FAQ pages are complete and free from errors.
No. Q
/
A
Question / Answer Applie
s to
HW
Applies to
app. SW
Applies
to BL
SW
4. Switch on your car radio and wait approx. 30 seconds
5. Switch off your car radio
6. Unplug the USB stick
7. PC: Using a text editor (e.g. Notepad) on your PC, open the
BLAUPUNKT\ID.TXT file that is located on the USB stick
8. PC: All the technical data relating to your Bluetooth interface are
contained in the ID.TXT file. For details, see question no. E02
Top
E04 Q
Why does my interface not create a file in the
BLAUPUNKT directory on my USB stick?
0
A
Is the name of the directory incorrect (too short? Too long? Contains
spaces? Contains special characters?)
Correct the directory name to BLAUPUNKT
A
Is the BLAUPUNKT directory write-protected?
Deactivate write protection (PC with Windows: right mouse button |
Properties… | uncheck the check mark next to "Read-only")
A
Is the USB stick write-protected (slide switch in position R | R.O. |
Read | …)?
Set the switch to the NOT write-protected position (W | RW | Write |
Read Write | …)
A
Is the USB stick protected by encryption / security / write-protection
software? If it is, deactivate protection using the relevant software.
This has, for instance, been observed with USB sticks from Kingston.
Top
E05 Q
Can I also connect the Bluetooth interface to an OEM
radio manufactured by Blaupunkt?
0
A
No, the Bluetooth interface is only intended for connection to the CDC
interface of Blaupunkt aftermarket car radios and Blaupunkt
aftermarket radio navigation systems (RNS).
Top