Technical data

Version: 04.12.2006 Bluetooth USB Interface 7 607 545 500 FAQ
Please understand that despite careful analyses and editing, Blaupunkt Page 4 / 23
is unable to guarantee that these FAQ pages are complete and free from errors.
1. Installation
No. Q
/
A
Question / Answer Applie
s to
HW
Applies to
app. SW
Applies
to BL
SW
E01 Q
How do I obtain information on my Bluetooth
interface?
0
A
• Create a directory called \BLAUPUNKT on a USB stick (see
software update instructions
)
• Plug the USB stick into the USB port of your Bluetooth interface
• Switch on your car radio and wait approx. 30 seconds
• Switch off your car radio
• Unplug the USB stick
• Using a text editor (e.g. Notepad) on your PC, open the
BLAUPUNKT\ID.TXT file that is located on the USB stick
• All the technical data relating to your Bluetooth interface are
contained in the ID.TXT file. For details, please see question no.
E02.
Top
E02 Q
What data are contained in the ID.TXT file?
0
A
• Product name
"Blaupunkt Bluetooth USB Interface 7 607 545 500 001"
• BT-ID: Serial number, e.g. "00-19-61-00-00-00"
• HW-Ver: Hardware version
• SW-Ver: Application software version
• SW-Sta: Status of the SW (OK | NOT OK)
• P.Date: Production date
• P.Code: Production code (DE, CN)
• Created by Boot-loader SW version / application SW version
Note:
By keeping these data handy, you can simplify error analysis for your
dealer or the Blaupunkt hotline so that you obtain more precise
information for finding a solution more quickly.
Top
E03 Q
When is the ID.TXT created?
0
A By the boot-loader software:
After the boot loader is started and the system recognizes that a USB
stick is present containing the directory [USB:]\BLAUPUNKT; i.e. the
file is written with details about the interface status as it is BEFORE
the download of a new version of the application software.
By the application software:
After the system recognizes that a USB stick is present containing a
directory called BLAUPUNKT.
If a file called ID.TXT is already present in the BLAUPUNKT directory it
will be overwritten without warning.
To ensure you acquire the latest interface status in the ID.TXT file
please perform the following steps (PC: steps that must be performed
on the PC):
1. PC: If a BLAUPUNKT\ID.TXT file is already present on your USB
stick, make a backup of it on your PC
2. PC: If a BLAUPUNKT\ID.TXT file is present on your USB stick,
delete it (delete only the file but NOT the BLAUPUNKT directory)
3. Plug the USB stick into the USB port of your installed Bluetooth
interface