Technical data

Version: 04.12.2006 Bluetooth USB Interface 7 607 545 500 FAQ
Please understand that despite careful analyses and editing, Blaupunkt Page 24 / 23
is unable to guarantee that these FAQ pages are complete and free from errors.
7. Device-specific FAQ (mobile phone)
No. Q
/
A
Question / Answer Applie
s to
HW
Applies to
app. SW
Applies
to BL
SW
D
Nokia mobile phones with voice dialing
H01 Q When does voice dialing work?
A
Voice dialing only works in the "normal state" (i.e. long press on the
"hang up" key).
As soon as you are in a menu or submenu, you can make a selection
from the PHONEBK using CD up / down (to select letter groups) and
track up / down (to select names within the selected group) (*TXT).
Top
D
Nokia 6230i
H02 Q How can I deactivate "PHONE" again after the first received and
ended call?
A
With this model of mobile phone the following might occur: after you
end the first received call with a long press on the PTT button, the
telephone switching feature (Tel. Mute) on your car radio might remain
active. Please press the PTT button for 2 seconds; you will then hear
the previously active audio source again.
Top
D
Benq-Siemens x75
H03 Q Why are Benq-Siemens x75 models NOT enabled for audio
streaming?
A
Some Benq-Siemens x75 models do basically support audio
streaming in accordance with AADP. Due to problems inside the
mobile phone (that can also occur in conjunction with other streaming
receivers), the connection is terminated after anywhere between a few
seconds and a period of up to approx. 20 minutes; the mobile phone
notification "Internal Bluetooth error" is then provided.
(e.g. Benq-Siemens S75, SW Ver. 40, Var. A105).
This is unacceptable for users.
It is conceivable that this fault will be remedied with a new version of
the Siemens S75 software.
Top
D
SonyEricsson K800i
H04 Q How do I start streaming from the mobile phone's media player?
A First establish a BT connection and then start the player.
Top
H05 Q How do I start streaming after a received phone call?
A
Immediately after the call, the mobile phone does not start streaming
over the interface but over the internal loudspeakers instead. Only
after the red telephone symbol disappears from the mobile phone's
display around 10-20 seconds after the phone call does the stream
resume over the interface as desired. This is a characteristic of the
mobile phone that we unfortunately cannot influence via the interface
(no stream commands reach the interface).
If streaming is already active before the telephone, the switch-over
from the call to streaming, however, occurs without delay.
Top