Technical data

Version: 04.12.2006 Bluetooth USB Interface 7 607 545 500 FAQ
Please understand that despite careful analyses and editing, Blaupunkt Page 19 / 23
is unable to guarantee that these FAQ pages are complete and free from errors.
S04 Q
What do the entries in the SETUP.LOG file mean?
0
A
6512
Top
Display
(*TXT)
SETUP.LOG
DL OK Last line
Setup successfully finished.
Congratulations!
No errors occurred during your software
download.
Please switch off your radio now and then
switch it back on again to activate the new
software.
DLER001 ERR 001
File SETUP.HEX not found
No file with the name "setup.hex" was
found in the BLAUPUNKT directory of the
USB stick.
Check whether the file was copied fully
onto the USB stick and whether the file
name has been written correctly.
DLER002 ERR 002
Wrong File Checksum
The SETUP.HEX file is corrupt.
Check whether errors occurred during the
download or whether the file was modified
after the download. If necessary, please
download it again.
BL 6512: Reformat the stick; next, create
the BLAUPUNKT directory and then copy
setup.hex into it (in BL 6512 there are
errors when handling large numbers that
can occur if the memory is fragmented).
DLER003 ERR 003 Error whilst deleting the flash memory with
the application software
DLER004 ERR 004
Not valid for this hardware
The SETUP.HEX file does not suit the
hardware version of your interface.
Check the hardware version of your
interface (is stated in the ID.TXT file under
HW-VER:) and compare this to the details
in the software version list
.
DLER500 ERR 500
SW seems to be a pirate copy
SETUP.HEX is not registered for this
interface device (mismatch of interface
serial number and SW serial number)
Are you really sure that you have got a
legal copy of SETUP.HEX registered for
your interface device?
The SW does not suit this interface (the
interface serial number and the software
serial number do not belong together).