Operation Manual

BP Car Phone 3.0 C User Manual

9.8.1 Message center number

Select MENU > SETTINGS > SMS SETTINGS > SMS CENTER if you need to change the phone

number of the service center, as given by your service provider. Enter the number using the keypad and

confirm with OK.

9.8.2 Saving an SMS message after sending

If you want to automatically save an SMS message to the SMS archive after it has been sent select

MENU > SETTINGS > SMS SETTINGS > SAVE SMS AFTER SENDING and choose ON or OFF.

9.9 Internet

To configure GPRS access to your service provider’s website select MENU > SETTINGS > INTERNET.

Enter individual parameters in the following menus. Then confirm them with OK.

MCC/MNC Enter mobile country code / mobile network code

APN Access point name

PASSWORD User password

TIP:

If needed, contact your service provider for these details.

The access data of the following service providers are already saved on the device:

Provider

MCC/MNC

T-Mobile D

26201

Vodafone D2

26202

E-Plus

26203

o2 Germany

26207

SFR

20810

Bouygues Télécom

20820

Orange

20801

P+T Luxembourg

27001

9.10 Clock

To activate the internal clock select MENU > SETTINGS > CLOCK. Choose the display mode (12

HOURS or 24 HOURS) and set the clock using the keypad.

The clock display starts 10 seconds after opening the main display. The time is merged in where the

service provider is displayed. When changing cells or switching to another network (roaming), the

current service provider is displayed for 10 seconds.

The clock is automatically synchronized when receiving a message or when a GPS signal is available.

NOTE:

If you have a BP Car Phone 3.0 C with an integrated GPS module, you only need to set the time

once with a valid GPS signal so that the time difference to Universal Time is correctly set.