Operation Manual

BP Car Phone 3.0 C User Manual

9.6.5 Backlight

The handset allows you to control the backlighting of the keypad and display separately. Select MENU

> SETTINGS > DEVICE > BACKLIGHT > KEYPAD or MENU > SETTINGS > DEVICE >

BACKLIGHT > DISPLAY and choose between AUTOMATIC and PERMANENT. The automatic option

means that the backlighting is activated whenever a key is pressed and is turned off after a preset

period of 30 seconds. The permanent option means that the backlighting is on continuously.

NOTE:

Permanent display backlighting is only possible if permanent keypad backlighting has been

selected.

9.6.6 Configuration

Select MENU > SETTINGS > DEVICE > CONFIGURATION to get to the settings for the hardware

and optional modules on the BP Car Phone 3.0 C You must enter the device code to gain access to the

submenus.

9.6.6.1 Downloading from server

By selecting MENU > SETTINGS > DEVICE > CONFIGURATION > DOWNLOAD FROM SERVER

you can download your own pre-programmed configuration file from a FTP server. This setting allows

you to configure all of your devices in a group with the same settings by just pressing a few keys.

9.6.6.1.1 Downloading configuration file

Select MENU > SETTINGS > DEVICE > CONFIGURATION > DOWNLOAD FROM SERVER >

SELECT. The FTP server’s address will appear. Once you have already activated all the FTP settings you

can start downloading the configuration file by pressing the call key. “Automatic configuration”

appears on the display. A progress bar shows the progression of the operation. After successful

configuration the main menu reappears.

If changes are needed in the FTP settings then select MENU > SETTINGS > DEVICE >

CONFIGURATION > DOWNLOAD FROM SERVER > SELECT > CHANGE. The following settings

are needed for successful configuration using a configuration file:

- FTP-Server (host name)

- File name (name of the configuration file)

- Username (username of the FTP user)

- Password (password of the FTP user)

NOTE:

You can find information on creating configuration files on the website (www.ptcarphone.eu).

9.6.6.2 Change configuration

To carry out all configuration settings manually select MENU > SETTINGS > DEVICE >

CONFIGURATION > CHANGE.