Operation Manual

Power menu
If suspend is chosen, the device will go to sleep mode, so that the ongoing
recordings and processes will be paused, but they can be continued by waking up
the device via the power button. If power off is selected, these processes will be
ended, for example a recorded track will be saved with and end point where the
device has been turned off.
Swipe function
Swipe function is the right tool for fast and accurate navigation inside our software.
This function allows the user to get back to previous screen(s) easily.
The method is to tap on the top of the screen, and with a pulling move, move down
thumb until previous screen is reached.
Swipe function is by pulling down the previous screen from the top
If you decide to stay on the same screen, just don’t finish but reverse the movement.
Note: This function is disabled on main screen.
2. Starting the device
2.1. First Startup
After the boot of the device and the initialization process have completed, the
language selection screen appears.
Tap on a language to choose your own language, then tap OK( ) button on
the bottom to move to the next screen.