Operation Manual

List selectors
When more options are available, only the actual value is shown; the current value
can be changed by tapping on it. When tapped, a list will appear with the available
options.
List selector
Tap on one option to select it.
Sliders
When a feature can have values that can be assigned to a scale, the software will
show sliders that look like analogue potentiometers to set the desired value.
Slider
If the values are not shown, the values are increasing from the left to the right. You
can select the right value by dragging the slider directly to the desired value.
Checkbox switches
When a function can only be enabled or not, a switch is used. The field contains the
name of the setting, and there is a tick on the right to show whether the function is
active or not.
Checkbox switch
When the tick mark is not shown, then the function is disabled. When it is displayed,
the function is enabled. Tap on the field to change the status.
Virtual keyboards and numeric pads
As mentioned earlier, the main input method is via the touch screen.
This means that an on-screen keyboard (OSK), and numeric pad is needed for
proper input possibilities.
ABC keyboard
The keyboard is for any letter-based input.
The alphabetic keyboard in the software does not contain special characters, but
they can be substituted with their simple versions.