Operation Manual

If the house number is not valid, the device will ask whether it should target
the center of the street itself.
Note: You don’t need to enter all the details. Without house number the
center of the street will be used, and without given street name, then the
center of the city will be used (the latter may not work in smaller cities).
After the address is selected, "Start navigation" screen will appear.
Destination details
On the upper side of the screen the selected address and the distance is
calculated.
Until the distance is calculated the beeline distance is displayed.
A graph with the altitude outline will be shown after calculation.
Note: BikePilot is able to calculate routes that are far not more than 300 km
(beeline) from your current position. If the beeline distance is above 300
km, then you will be warned.
BikePilot application proposes three alternative routes.
Alternative route selector
The “Suggested” path gives the best combination of roads, paying attention
to optimize the type of roads (based on user profile), hardness and length
of the route.
The ”Easiest” option calculates the route to meet the least difficulties on the
road, avoiding too sharp altitude changes, for example.
The “Shortest” option will take the user to the destination using the shortest
available path, regardless of the difficulty of the route.
By tapping on one of the three possibilities, the device will show the route
that belongs to that option. When on the Details screen, the Altitude profile