Instructions

A12C
15
www.blaupunkt.com
● If the appliance is installed, operated or stored in a non-ventilated
area, the room must be designed to prevent the accumulation of
refrigerant leaks resulting in a risk of fire or explosion due to ignition
of the refrigerant caused by electric heaters, stoves, or other sources
of ignition.
● The appliance must be stored in such a way as to prevent
mechanical failure.
● Individuals who operate or work on the refrigerant circuit must
have the appropriate certification issued by an accredited
organisation that ensures competence in handling refrigerants
according to a specific evaluation recognized by associations in the
industry.
● Repairs must be performed based on the recommendations from
the manufacturing company.
● Maintenance and repairs that require the assistance of other
qualified personnel must be performed under the supervision of an
individual specified in the use of flammable refrigerants.
● Do not use means to accelerate the defrosting process or to clean,
other than those recommended by the manufacturer.
● The appliance shall be stored in a room without continuously
operating ignition sources (for example: open flames, an operating
gas appliance or anoperating electric heater).
● Do not pierce or burn.
● Be aware that the refrigerants may not contain an odour.
● Compliance with national gas regulations shall be observed.
● Keep ventilation openings clear of obstruction.
● The appliance shall be stored so as to prevent mechanical damage